-
DATA COLLECT
MQTT protocol is a communication protocol designed for widespread use of IoT devices. It is a protocol designed to carry the data that emerges when industrial (IIoT) and non-industrial IoT devices perform their duties and the messages you want to ...
29.10.2022
-
START UP
ISO ' nun her ay düzenlediği "Girişimlerin Gözünden Sanayide Dijital Dönüşüm Semineri" webinar programına konuşmacı olarak katıldık.
17.02.2021
-
START UP
Alesta Teknoloji daha önce yaptığı yatırımını 2 katına çıkardı.
17.02.2021
-
MY HUBBOX Panel
By clicking this tab , you can change your username and password that you used to login to the HUBBOX LOCAL settings panel.
17.11.2020
-
MY HUBBOX Panel
It is the area where you can see sub-accounts linked to your account. You can edit, delete an existing account or add new account.
16.11.2020
-
DATA COLLECT
Remote access; It is the general name given to the methods that allow you to connect and manage information systems located remotely using the internet from any location. Using the computer or any application you want to access over the establishe...
08.11.2020
-
DATA COLLECT
VPN is basically described as ''Virtual Private Network''. The biggest reason for choosing as a communication system is that all data is encrypted and transferred and it allows to work in local network.
01.11.2020
-
DATA COLLECT
IoT (Internet of Things) technologies, which is the Internet of Things, are developing more and more in our lives.
01.11.2020
-
DATA COLLECT
HUBBOX works to support many industrial protocols used today in the device and software systems it develops.
01.11.2020
-
DATA COLLECT
Данные всегда были важны на производственных предприятиях. До сегодняшнего дня системы сбора данных предоставлялись операторами для заполнения форм вручную.
01.11.2020
-
DATA COLLECT
SCADA (Supervisory Control And Data Acquisition), translated as “Supervisory Control And Data Acquisition”. SCADA systems are a system where facilities and machines consisting of wide and many control points can be monitored from a single center w...
01.11.2020
-
DATA COLLECT
VNC (Virtual Network Computing) enables a network device containing graphics applications to be used and managed remotely by accessing it from another network or over the same network.
01.11.2020
-
DATA COLLECT
Modbus is a serial communication protocol developed by Modicon in 1979 for use with PLCs.
01.11.2020
-
DATA COLLECT
OEE is a system that shows how the equipment used by a facility or factory is used for its products.
01.11.2020
-
DATA COLLECT
M-Bus Metering, It is an abbreviation that comes from the words Bus.
M-Bus is a standard developed for the communication of measuring devices.
01.11.2020
-
LOCAL PANEL
"HUBBOX Connect X1" contains tools that you can test whether your device's network connections are healthy and some other features.
29.10.2020
-
LOCAL PANEL
"HUBBOX Connect X1" is the section where the data of the tasks you have defined on your device are kept offline.
29.10.2020
-
MY HUBBOX Panel
"HUBBOX Connect X1" is a screen used to connect your device to the wireless internet network in its environment.
25.10.2020
-
MY HUBBOX Panel
On this tab, you can make the necessary ip settings to connect your "HUBBOX Connect X1" device to the network where it is located.
25.10.2020
-
LOCAL PANEL
From this panel, you can view the version information of your device, change the Hubbox local panel login information, configure network settings and restart your device.
25.10.2020
-
LOCAL PANEL
"HUBBOX Connect X1" is the panel that you can use to view the RC1 switches connected to your device and to make changes on these RC1 switches.
25.10.2020
-
LOCAL PANEL
On this tab, you can make the necessary ip settings to connect your "HUBBOX Connect X1" device to the network where it is located.
25.10.2020
-
LOCAL PANEL
It is used to forward connection requests from the WAN port to any device connected to the LAN port.
25.10.2020
-
LOCAL PANEL
You can change the Wifi connection of your "HUBBOX Connect X1" device through this panel.
25.10.2020
-
MY HUBBOX Panel
While "HUBBOX Connect X1" is collection data , it must be in the same network with PLC, Panel , ...
12.10.2020
-
LOCAL PANEL
You can see the connection status of your Hubbox device and the settings that are used while accessing the internet through this panel.
08.10.2020
-
MY HUBBOX Panel
After your device by internet connection the serial number and registration code of the HUBBOX Connect X1 you can check whether it is online with the “ Check Online” button and register it with the “Register” button by clicking this section.
07.10.2020
-
MY HUBBOX Panel
This is one of three methods of connecting Hubbox devices to wifi.
07.10.2020
-
MY HUBBOX Panel
Hubbox detail menu can be accessed by clicking ‘Box Id’ on the device manager screen.
07.10.2020
-
LOCAL PANEL
Before you can configure the settings of your Hubbox device, you must login to your Hubbox Settings Panel. To do this, first open the link https://192.168.24.254/ with any browser.
07.10.2020
-
MY HUBBOX Panel
What does my hubbox “DEVICE MANAGER” panel do ?
30.09.2020
-
START UP
https://www.startus-insights.com/innovators-guide/top-10-industry-4-0-trends-innovations-2020-beyond/
24.07.2020
-
LOCAL PANEL
With the Tethering feature of your phone, you can transfer your internet on your mobile device to your HUBBOX via USB cable.
15.05.2020
-
START UP
HUBBOX allow USB devices to be used remotely over a network just as if they were locally connected
21.06.2019
-
DATA COLLECT
You can connect to Siemens S7 PLCs via ethernet or USB port using the converter you want. Simatic S7-300, Simatic S7-1200, Simatic S7-1500 You can access PLCs directly.
21.04.2019
-
DATA COLLECT
LG XBC, XGT, XGB models with no Ethernet ports can be accessed via USB port.
21.04.2019
-
DATA COLLECT
All devices and software manufactured by HUBBOX can communicate with all devices using the MODBUS (Serial and TCP) protocol. It is mostly used for data collection and transmission.
21.04.2019
-
START UP
We attended the WIN EUROASIA 2019 fair, our product and our interest was very good. Thank you to all our visitors.
14.03.2019
-
START UP
We have made a presentation and answered the jury questions easily. They decided to support and help us to reach potential customers.
12.03.2019
-
START UP
We made our presentation to the board to which we were invited by TIM-TEB Startup. They were interested in HUBBOX and our talents, it was a productive day.
06.03.2019
-
START UP
After completing research and development stage successfully, we have been awaded with industrial application and mass production support by KOSGEB
25.02.2019
-
START UP
We were one of the few startups invited to introduce our project on stage for leader IT Companies.
11.12.2018
-
START UP
We have been invited to present our product to UniLever team. Positive feedbacks have been noted.
09.12.2018
-
START UP
We had chance to tell about our startup story. Introduced our product.
06.12.2018
-
START UP
Many attendees visited our stand. We showed a demonstration of our product. Hope to be in finalists next year.
02.12.2018
-
START UP
We have attended to INNOVA's event and talked about partnership opportunities.
11.11.2018
-
START UP
BigBANG etkinliğinde yarı finali geçtik, fuaye alanında olacağız. Herkesi bekliyoruz.
09.11.2018
